+ full functional range
Compatibility List
- not supported
CIX 3000 Blue (SW-Version BT5.11) in connection with CI 3000 (SW-Version OS4.11)
o limited functional range
Compatibility List
CIX 3000 Blue in connection with CI 3000
Siemens VDO Automotive
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
Brand
Type
Navigation Computer
Firmware (Mobile Phone)
Incoming Call
Outgoing Call
CLIP Call Register
Download Phonebook SIM
Download Phonebook Mobile
Add Phonebook Entry
Delete Phonebook Entry
Read SMSWrite SMS
Incoming SMS advice
Edit SMSAnswer SMS
Call Back SMS
SW Download
Voice Recognition
Functions with RCH 3000
Switch Handsfree/Private
Bluetooth ON/OFF
RESET CIX 3000 Blue
Handsfree Profile
Headset Profile
Volume up/down Active Call
Volume up/down Ringing Tone
Reconnect during Active Call
Remarks
+
Function supported
-
Function not supported
o
Function limited
§ 14) During active call PB Download and SMS Download are
interrupted and continue after the end of the call in some
configurations.
§ 15) Call registers are not accessible during PB Download.
§ 17) Some automatic provider announcements (e.g. after
dialing an invalid number) can be ended only at the phone.
§ 18) If the SIM is full, there will be no storage, even if
"successful" was indicated in Nav HMI.
§ 19) Problems may occur after very frequent volume change.
§ 21) Some Provider SMS have a wrong name.
§ 27) In some configurations the call registers may be unsorted.
All phones listed above
ignition and wait for Nav shutdown (+1min), or turn CIX 3000
Blue Off/On via RCH 3000. Only one phone can be connected at
a time.
§ No support of MC 5400 via CIX 3000 Blue!
§ Displayed network provider name sometimes is not complete.
§ Bluetooth Pairing: Sometimes wrong name is transmitted, but
the system still works correctly.
§ 1) Problems may occur with some special characters.
§ 2) CLIP has to be activated at the GSM provider.
§ 4) Possible for SIM phonebook only.
§ 7) Sometimes the phonebook download may be incomplete,
not all entries are loaded into Navigation.
§ 12) Possibly no mute.
§ SW Download: After successful download a Navigation shutdown is required.
§ Mute: configure radio settings to low-active (mute at 0-Voltage).
§ During SMS or PB Download into Navigation the starting of other actions may lead to problems, e.g. missing PB entry, interruption of incoming call HMI, etc.
§ SMS: No pop-up on new incoming SMS for some time after start-up during SMS download into Navigation.
§ Installation hint: remove cover from SubD25 before mounting CIX 3000 Blue at CI 3000!
§ Installation hint: In case of high distortion in combination with Tel-In of a radio: Try to change polarity of the speaker-out of CIX3000Blue.
§ Installation hint: In case of problems with Mute: Don't connect the Mute-wire of CI3000 with the radio, isolate the wire ends.
Any Bluetooth phone
In General all mobile phones supporting the Handsfree/Headset Profile (Bluetooth-Spec. 1.1) are compatible. Implementation exactly complying with Bluetooth
specification 1.1. as well as with Handsfree/Headset specification.
All tested mobile phones are shown in this list. It could not be guaranteed, that all mobile phones and configurations are working without any limitation.
All phones listed above
07.07.05 Version 3.1 CI3000 SW OS4.11 and CIX 3000 Blue SW BT5.11
Errors and omissions excepted. Subject to modifications.
7 / 7