8
* Depending on version
AUDIO
ON/OFF
• Press
to switch on the set. Press
for more than 2 seconds to switch off the set.
VOLUME
Please make sure you can still hear the traffic
(horns, sirens........)
• Press
/
to adjust the volume.
Note :
You can adjust the start-up volume. When
the start-up volume is set to maximum level, it
may be extremly loud when you switch on the
set. See 'SAM' (page 11), option 'START'.
MUTE
• Press
to mute/demute the sound when
the set is switched on.
Note :
You can adjust the mute level.The volume
may be louder during mute when the mute level
is higher (e.g. 16) than the current volume (e.g.
5). See 'SAM' (page 11), option 'MUTE'.
AUDIO MODE SETTING
• Pres
to select desired audio mode.
• Press
or
to adjust the selected
audio mode.
– BASS : Bass (-7...+7)
– TRE : Treble (-7...+7)
– BAL : Balance (-7...+7)
– FAD : Fader (-7...+7)
– Sound Style (BASS-TRE, ORIGINAL, JAZZ,
VOCAL, POP, CLASSIC, ROCK)
After 5 seconds the display goes back to the
last mode of operation.
Adjustment of Bass and Treble setting is only
possible when BASS-TRE is selected as the
sound style.
BASS BOOST SYSTEMS
• Press
to select desired bass boost (not
applicable when ORIGINAL is selected as the
sound style).
SOURCE
• Press
to select the desired source :
- TUNER
- TAPE*/CD*
RADIO
WAVEBAND
• Press
to select the desired waveband :
Note :
You can suppress MW/LW (AM) bands
if not required. See 'SAM' (page 11), Option
'MW/LW (AM)'.
AUTOMATIC SEARCH
Use search tuning to automatically search for a
station.
• Press
to tune to a station of a lower
frequency or
to a higher frequency.
– You will receive a station after a short time. To
search for another station, press the key again.
Search sensitivity (only FM)
• Press
to switch between LOCAL and
DISTANT mode. Select 'LOCAL' if you wish to
search only for strong stations during search
tuning.
Frequency scan / Preset scan (see 'SAM'
page 11 option 'SCAN')
Frequency scan allows you to listen to each
located station on the current waveband while
Preset scan allows you to listen to each stored
preset station on the current waveband.
• Press
to activate/deactivate Frequency
scan or Preset scan.
• Press
or
to start the scanning.
Note :
You can select how many seconds each
station is scanned, see 'SAM' (page 11); option
'SCANTIME'.
Manual tuning (if you know the frequency of
the required station)
• To switch to manual tuning :
See 'SAM' (page 11), option 'TUNING'; set
value to 'MANUTUNE'. The radio remains in
manual tuning mode until you change this setting
back to 'AUTOTUNE'.
• Press
to tune to a station of a lower
frequency or
to a higher frequency.
PRESELECTED STATIONS
Manually storing stations in a preset
You can manually store 20 FM stations, 10 MW
stations and 10 LW stations.
• Tune in to the desired station.
• Press for more than 2 seconds to enter preset
store mode.
• Press to select the preset number you wish
to use.
Display shows alternately preset station
number and current stored station.
• Press for more than 2 seconds to store the
station on the selected preset number.
When storing an FM station, the relevant
RDS information and AF mode (on/off) are
also stored on the preset.
01-2102.p65
15/04/2001, 3:49 PM
8
