11
* Depending on version
SAM (Software Access Mode)
It is possible to modify many of the set's default settings according to your preferences via 'SAM'.
• Press
to enter the 'SAM' menu.
• Press or to select one of the options in the menu you want to modify.
• Press
or
to select the value/setting.
• Press
to exit the 'SAM' menu.
The set automatically leaves this mode after 30 seconds if no key presses are made.
Option
Value/Setting
Usage
( or )
(
or
)
TAVOL
[1 to 31]
Select volume level of Traffic Announcement, News bulletins
and Alarm messages.
START
[1 to 31]
– Select the start-up volume when power on.
– After modification of the start-up volume, if the set is
switched off and on within 10 minutes, the start-up volume
reverts to the last used volume setting.
– After modification of the start-up volume, if the set is
switched off and on after more than 10 minutes later, the
start-up volume is the level defined in 'SAM'.
MUTE
[0 to 16]
Select the mute level.
BEEP
[0FF, 1, 2, 3, 4, 5]
Select volume level of confirmation beeps.
TEL
[TEL OFF, MUTE HI,
– Select 'TEL OFF' if no car phone is connected to
MUTE LO]
the set.
– Select 'MUTE LO' or 'MUTE HI' (according to phone type)
to automatically interrupt the set's sound output when
using your car phone.
CLK
[ON, OFF]
Select 'ON' to activate CLOCK feature.
CLOCK
[RDSCLOCK,
Select 'RDSCLOCK' to activate RDS clock or "MANCLOCK'
MANCLOCK]
to set clock manually.
[CLOCKSET]
If 'MANCLOCK' selected; set the time.
to adjust the hour
digit,
to adjust the minute digit.
[12HCLOCK,
Select desired clock format.
24HCLOCK]
BRIGHT
[1, 2]
Select the level of display and button brightness (only when
car headlights are switched on and connected to pin A6,
see 'INSTALLATION' (page 5)).
ANGLE
[-1, 0, +1]
Select the viewing angle of the set's display.
LOGIC
[ON, OFF]
Select 'ON' to limit the use of the set to one hour when the
car ignition is switched off. Select 'OFF' to prevent the set
from turning on when the car ignition is switched off. (Only
when A7 and A4 are connected correctly, see page 5 for
correct connection of power supply).
01-2102.p65
15/04/2001, 3:49 PM
11
