VDO CD 1107 -, Manual

Page: 11 / 18

14
4. 12. Mute/demute audio level
5. SEL MENU Short press the knob to
select the modes in the
following sequence:
VOLUME>BASS>
TREBLE>BALANCE>
FADER.
Long press the knob to
select the modes in the
following sequence:
TA SEEK / AALARM>
MASK DPI / MASK ALL>
PI SOUND / PI MUTE>
RETUNE L / RETUNE S.>
TA VOL+/- >
DSP ON / OFF>
ESP ON / OFF>
LOUD ON / OFF
SEEK1 / SEEK2>
STERO / MONO>
DX / LOCAL>
VOL LAST / VOL ADITION
6. VOL 13. Increase/decrease
volume
7. 6. Toggle sound equalization
8. 5. Toggle the display modes
9. 4. Radio:
Short press: Scan the 6
preset radio stations for 5
sec. per station
For CD1327 only
Long press: Search and
store six radio stations
CD:
Activate track/file search
(song selection mode)
10. 1....6 14. Radio:
Short press: recall
memorised radio
stations
Long press: store
selected radio
stations
CD:
Press to activate
special control functions
(Play/Pause, Repeat,
Introduce (10 sec.),
Random,
For CD1327 only
Skip 10 tracks back,
Skip 10 tracks forward
11. 8. Activate/deactivate Traffic
Announcement Search
12. 2. Change source between
the FM/AM, CD and
Auxiliary modes
13. 9. Select stations by program
type
14. 7. ENT
ESP
AF/REG
Radio & Remote Control:
Press short: Toggle AF-
REGionalisation
Long press: select
electronic shock protection
For CD1327 only
Press long: Enter (in
function selection)
15. Eject/reload CD
16. 3. Radio:
Short press: Change FM/
AM band
For CD1327 only
Long press: select ID3 tag
detection
17. LCD Screen Shows all information and
functions
18. CD Load Slot Slot to load/unload CD
19. REMOTE CONTROL Receives signal from the
Sensor IR Remote Control
13. Press to select special
functions menu
SECURITY
Removing the Front (fig. A/B and J)
1. Press the key, to fold down the detach-
able front panel.
2. Take the detachable front with you when you
leave the car.
3. Keep the front in its protective cover.
Replacing the Front (Fig. J and L)
1. Take the front panel from its protective cover.
2. Insert the front into the radio until it clicks
into position.
3. Close the front until it clicks into position.
Note 1: If you hear a warning signal, the front is
not properly replaced!
Note 2: To ensure good connection between the
set and the detachable unit, it is advisable to
clean frequently the connections with a cotton
swab from time to time!