The components of the system
The scope of supply comprises:
-
Bus Analog Interface (extended Version)
-
Installation instructions
Accessories
(not included in the scope of supply):
GBI VDO No. N03 321 006
EDB VDO No. N03 321 002
Abbreviations
The following abbreviations are used in these installation instructions:
BAIe:
Bus Analog Interface (extended Version)
GBI:
Gauge Bus Interface
EDB:
Engine Data Box
SAE:
Society of American Engineers
SAE J1708:
SAE document, description of hardware for data
communication
SAE J1587:
SAE document, description of data transfer
MID:
Message Identifier address of the data source
(see SAE J1587)
PID:
Parameter Identifier designation of the record
(see SAE J1587)
The functions of the Bus Analog Interface (BAIe)
The Bus Analog Interface (BAIe) can receive digitised sensor data in SAE
J1708/1587 format and use these data to activate analogue display
instruments from the VDO Standard or VDO Ocean Line series.
The sensor data received are converted into the relevant measurement
signals with the aid of programmed characteristic curves.
In addition, the BAIe has 3 analogue inputs for pressure, temperature or
fuel level sensors (impedance sensors).
32
VDO BUS ANALOG INTERFACE / FUNCTIONS
Summary of Contents for BAI e
Page 12: ...Connection of a pressure sensor to the BAIe 38 INSTALLATION BAIe Plug 1 1 1 or 1 2 or 1 6 ...
Page 13: ...Connection of a fuel level sensor to the BAIe 39 INSTALLATION BAIe Plug 1 1 1 or 1 2 or 1 6 ...
Page 15: ...41 INSTALLATION Alarm outputs BAIe Plug 3 See page 50 for pin assignment ...