Operations
AcquaLink 7" is a versatile device. It lets you control all the engines connected to Nav Box in a single
monitoring point and at the same time.
Select the number of engines on the boat when first turned on or when reset. If the selected number of
engines is different from the installed engines, only the data of the selected engines will be displayed. The
number of engines can be changed later (see
"Change the number of engines to be displayed" on page 17
).
Received signal priority
If the same data is transmitted by more than one signal for the same engine, the received signal priority is
the following:
1. Analog input
2. NMEA 2000
3. SAE J1939
4. NMEA 0183
On/Off
The on/off mode depends on the connection made during installation.
The VDO logo and software version followed by the AcquaLink logo appear when turned on. In addition, if
before turned off the display was controlled by Nav Control or if on the VDO CAN bus network there is only
one display, the Nav Control icon appears.
The display prompts you to select the type of boat and the number of engines to be monitored when first
turned on or when reset.
Function of the display buttons
Button
Function
Briefly press:
l
Access favorite groups 1, 2 and 3.
Getting started
5
7” TFT display | Instruction manual v. 1.0 | © 2018 Continental Automotive Switzerland AG
Summary of Contents for AcquaLink A2C59501997
Page 1: ...AcquaLink 7 TFT display Instruction manual v 1 0 ...
Page 2: ......
Page 52: ......
Page 53: ......
