Configuration and calibration
Nav Box recognizes the connected sensors and applies the default calibration values. For the engine data
simply set the type of sensor and the value is read correctly. Other sensors can be configured by setting a
correction value for the value read by the sensor. It is possible to configure and calibrate the fuel level
sensor.
Set the engine data sensors
1. Press
to access the main menu and then scroll and select
SENSOR CONFIG
.
2. Scroll and select
Engine
.
3. Scroll and select the data (e.g.
Oil temp
). To view factory settings, see
4. Scroll and select the type of sensor (e.g.
+50 to 150 °C
).
5. Hold down
to return to the data pages.
Configure the sensor for engine revolutions in frequency
1. Press
to access the main menu and then scroll and select
SENSOR CONFIG
.
2. Scroll and select
Engine
.
3. Select
Pulse per revolution
.
4. Set the offset factor.
NOTICE
: confirm all the digits to save the value.
5. Hold down
to return to the data pages.
Sensor configuration
31
7” TFT display | Instruction manual v. 1.0 | © 2018 Continental Automotive Switzerland AG
Summary of Contents for AcquaLink A2C59501997
Page 1: ...AcquaLink 7 TFT display Instruction manual v 1 0 ...
Page 2: ......
Page 52: ......
Page 53: ......
