VCS VIP 1000, User Manual

Page: 57 / 118

Chapter 6 Configuring the Transmitter
VIP 10 / VIP 1000 57
Warning!
Although the modified network settings are copied to the VIP when the Set
button is clicked, they become effective only after the unit has been
restarted. To do this, enter the old IP address with
/reset
appended to it
in the address field of the Web browser. The unit will be accessible only at
its new IP address after this action.
Unit IP address:
Enter the desired IP address for the VIP in this field. The IP address must be
recognized by the network.
Subnet mask:
Enter the corresponding subnet mask here if the unit is to communicate via a
subnet.
Gateway IP address:
Enter the corresponding IP address here if the unit is to establish a connection
outside the local network independently. Otherwise, this field can remain empty
(0.0.0.0).
Video/Audio transmission:
If the device is used in front of a firewall, TCP (Port 80) should be selected as the
transmission protocol. For use in a local network, choose UDP .
Warning!
Multicast operation is possible only with the UDP protocol. The TCP
protocol does not support multicast connections.
Ethernet link type:
Adjust here the ethernet link to the network. In most applications Auto is the
correct choice. For some routers and switches it can be necessary to set the
Ethernet link to a fixed value. In that case select the appropriate value:
]
10 MBit/s HD = 10 MBit/s half-duplex
]
10 MBit/s FD = 10 MBit/s full-duplex