
Configuring the Transmitter
Chapter 6
46
VIP 10 / VIP 1000
]
QCIF
176 × 144 pixels
]
CIF
352 × 288 pixels
]
2CIF
704 × 288 pixels
Reset this parameter preset:
Click the
Default
button to reset the profile to its factory presets.
Video input settings
The 75 Ohm termination of the VIP can be set here. If the video signal is to be
looped through, the termination must be set off. The default setting for the video
input termination is
On
.
Video input termination:
To loop the video signal through choose
Off
.
Audio configuration
In addition to video data, the unit can also transmit audio signals. The
transmission of audio takes place at the same time as that of the video data and
thus increases the size of the data stream. If you use the MPEG-4 format for
video data, audio transmission can be activated separately here. In this case, the
audio data stream requires an additional bandwidth of about 80 kBit/s.
Summary of Contents for VIP 1000
