VCS VideoJet 100, Manual

Page: 95 / 118

95
VideoJet 100
Care and Service
7
Software upload via FTP
The VideoJet 100 is designed in such a way that its functions and
parameters can be updated with software. In such cases, transmit
the updated software package via the network to the device. On ter-
mination of the connection, the software will be automatically
installed. This allows a device to be remotely serviced and updated
without a technician having to modify the device installation on site.
The latest software can be obtained from your VCS Service centre
or from the Internet via the download site under www.vcs.com.
You can carry out the software upload using the FTP protocol, e.g.
with the FTP command which forms part of the standard scope of
supply of Windows 95.
"
Save the update file to your hard disk.
"
Open the MS-DOS input window.
"
Start the FTP session by entering the IP address of the
VideoJet 100 at the command
c:\ftp
. The FTP server of the
VideoJet 100 replies and waits for the input of a user name.
"
Enter the user name
Service
.
"
Then enter the Service password, if necessary. The FTP server
confirms the login.
"
Start the software upload by entering the name of the update file
after the command
put
.
Attention!
Before starting the software upload, ensure that you have selected
the correct upload file! An upload of other files can result in the
device being no longer addressable and having to be replaced.