VCS VideoJet 100, Manual, Page: 50 / 118

Configuration with web browser
50
VideoJet 100
Alarm input 1 ... 4:
The external sensors connected to the alarm inputs are monitored.
If a sensor is tripped, an alarm is triggered.
Select On to activate the alarm triggering via external sensors.
Otherwise select Off . You can specify for the alarm input whether
the alarm is triggered by the voltage level Active high or Active
low .
Name:
You can type a text in the text box, which is displayed on the screen
in case of an alarm.
Alarm input 5 (Master):
It is possible to use the alarm input 5 as master alarm, for example
if a key switch is used for making the system alert. If this option is
activated, the alarm input 5 must be active in order to enable all
other alarms.
Connections
on alarm You have the possibility of setting the behaviour of the VideoJet 100
in the event of an alarm.
For example, in the event of an alarm a connection can be automa-
tically set up to a predetermined IP address (VideoJet receiver or
PC with receiver software).
Alternatively alarm statuses can also be documented by e-mail. A
receiver who does not have a video reception device can thus also
be informed. In this case, an e-mail with an attached JPEG image
is sent to a predetermined e-mail address.
Connect on alarm:
Select On to automatically set up a connection to a predetermined
IP address. Otherwise select Off .
Live video receiver IP address:
Enter here the IP address to be notified in the event of an alarm.
Receiver password:
If applicable, enter the password to get access to a transmitter unit.