VC 11564 Mounting And Operating Manual Download

Page: 78 / 96

CMS – Playback Mode

Alarm List

shows the 50 latest alarm messages. Click the highlighted event to acknowledge

the alarm. Check

Popup when Alarm Occurred

box to bring up Alarm List when an alarm is

triggered.

You may update the status of the new alarm to Unresolved, Resolved or Pending. Once the status

is updated, the event will be removed from the Alarm List. To further update the status of the alarm

event, you will need to go to

Alarm Log

, which contains the full list of alarm events.

Setup

Press the Setup button to go to the CMS setup page.

Screen Display

Supports the 4/8/9/10/13/16/25/36/64 display

(CMS Lite version supports 16 display, Hybrid

16 version supports 36 display, Hybrid 32 version supports 64 display)

For Full-Screen Display,

please help to click directly on the desired channel to select then click

again to switch to full-screen. Click again to return to the previous screen display.

Summary of Contents for 11564

































































































Search results

Summary of Contents for 11564

Reviews:

Related manuals for 11564

Brands by name

Popular brands

VC 11564, Mounting And Operating Manual

Search results

Summary of Contents for 11564

Reviews:

Related manuals for 11564

Brands by name

Popular brands