CMS – Setup Menu
46
- Mode (Indoor / outdoor)
*
- Video Source (NTSC / PAL)
*
*Mode option is only available for VGA device.
*Video Source option is only available for VGA, 1.3M and 2M device.
*1280
x 720, 1600 x 1200 is for 2 mega Pixel IP camera; 1280 x 1024 is for MEGA Pixel IP Camera.
Video Quality Setup:
On the
Video Quality
section, you could adjust
Brightness, Contrast, Hue,
Color or Sharpness
to the scene environment.
Option:
Check the box of
Video Loss Detection
to detect any video loss.
Check the box of
Audio In
to enable receiving sound from the camera.
Check the box of
Audio Out
to enable transmitting sound to the camera.
Motion Setup
1.
Click
to frame the motion area. Left-click on
the screen and move the cursor to frame the
desired area for motion zone. Each Camera can
be set up to four (4) detection zones. You can
adjust the zone size and drag it to the desired
position.
2.
Select the detection zone you want to delete and
Click
to delete it.
3.
Adjust the sensitivity of the detection.
(1-10; 10: highest sensitivity)
Alarm In and Alarm Out Setting
1. Insert name and check
Enable
box. This name will be shown on the E-map.
2. For
Alarm In Setting
, click
NC
button to switch to
NO
when needed.
