VBrick EtherneTV-STB, Quick Start Manual

Page: 4 / 12

2 EtherneTV Media Distribution System
Table 1. Front Panel – Left to Right
Table 2. Rear Panel – Left to Right
Step 3. Set the IP Address
You need to know the IP address in order to run the web-based STB Admin Configuration
application. By default, the set top box is configured for DHCP (Dynamic Host
Configuration Protocol) and will automatically retrieve an IP address from a DHCP server if
Infrared Sensor Above LEDs. Used for IR remote control and wireless keyboard.
Waiting Blinks red during initial start-up.
Transfer Blinks white when accessing flash memory.
Power Steady green when power is applied.
On/Off On/Off push button.
Power Plug Connects to power cord.
VGA Port Used to view video on a VGA monitor.
Serial Port Used for Serial Port Passthrough or to open a Command Prompt.
PCI Card Slot Not Used.
S-Video Connect to standard TV.
Video Composite video out.
Audio Left/Right Audio out left and right.
USB Ports (2) Connect USB mouse and/or keyboard.
SPDIF Digital audio. Not supported.
LAN1 Connect to local area network.
LAN2 Not used.
PS/2 Connect PS/2 keyboard or mouse.