background image

3

safety information

2. Safety Information

FOR HOUSEHOLD USE ONLY.

When using the vacuum cleaner, basic safety precautions
should always be observed, including the following:

1.

Do not leave the carpet washer unattended when
plugged in. Unplug it from socket when not in use.

2.

To prevent electric shock do not use outdoors.

3.

Not to be used as a toy. Children should be supervised to
ensure that they do not play with the appliance.

4.

This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning the use of the appliance by a person
responsible for their safety.

5.

Use only as described in this manual.

6.

Do not use with a damaged cord or plug. If the supply
cord and/or plug is damaged, they must be replaced
by the manufacturer or a Vax Service Agent in order
to avoid hazard or invalidating the guarantee.

7.

Do not pull or carry by the cord, use the cord as a
handle, allow the cord to come into contact with hot
or sharp surfaces or close a door on the cord.

8.

Do not unplug by pulling on the cord.

9.

Do not handle the plug or carpet washer with wet
hands.

10. Do not put any objects into openings or operate with

openings blocked, keep them free of anything that
may reduce airflow.

11. Keep hair, loose clothing, fingers and all parts of the

body away from openings and moving parts.

12. Do not use the carpet washer on any glowing,

burning or smoking particles.

13. Do not use without the clean and dirty water tanks in

place.

14. Turn off all controls before unplugging.

15. Do not use to pick up flammable or combustible

liquids such as petrol, or use in areas where they may
be present.

16. Keep the unit on the floor.

17. Do not use an extension cord.

18. Do not attempt to remove blockages with sharp

objects as they may cause damage.

19. Store indoors put away after use to prevent tripping

accidents.

20. Using improper voltage may result in damage to the

motor and possible injury to the user. The correct
voltage is listed on the rating label.

21. A hazard may occur if the carpet washer runs over

the power supply cord.

22. To prevent dirty water from running into motor, do

not hold the appliance upside-down or lay on its side.
Use appliance in normal cleaning position.

23. Use extra care when cleaning on stairs.

24. Do not carry appliance while motor is running.

NOTE: Carpets should be dry vacuumed thoroughly
before washing.

NOTE: The unit must be unplugged from the mains
socket outlet after use, and before cleaning or
maintaining the unit.

IMPORTANT: This unit is not intended for
commercial use.

PLEASE KEEP THESE INSTRUCTIONS
FOR FURTHER USE.

!

Motor Thermostat

IMPORTANT:

The motor is equipped with a thermal

cut-out. If for any reason, the vacuum cleaner should
over-heat, the thermostat will automatically turn the
unit off. Should this occur, unplug the vacuum cleaner
from the electrical outlet and turn off the switch.
Remove the dirty water tank and empty. Clean the
filters. Allow the cleaner to cool for approximately one
(1) hour. To re-start, plug into an electrical outlet and
switch back on.

Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308

V-026 Series User Guide.qxd:V-026  26/3/10  15:45  Page 3

Summary of Contents for V-026 SERIES

















Reviews: