Taking care of your machine
Taking care of your machine
Cleaning the shroud
Turn the dirt container lid
anti-clockwise and lift to remove.
Press button on post motor
filter cover and remove.
Tap over a bin to remove
dirt and debris.
Brush dirt from the shroud.
Remove the post motor filter
from the filter cover.
Check the post-motor filter
for discolouration.
tap
Switch off your vacuum cleaner
at the main socket. Using a pair
of scissors cut any hair or debris
free from around the brushbar.
Removing debris from the brushbar
A
RED
light will indicate
a jammed brushbar.
Turn the vacuum cleaner back on.
A
GREEN
light will indicate that the
brushbar is clear and ready for use.
Changing the brushbar
Using a crosshead screwdriver,
remove 3 screws from the side
of the floorhead.
Remove the end cap belt cover.
Remove the brushbar location
plate to gain access to the belt.
Replace the old belt, ensuring the
teeth are fully engaged with the cogs.
Pull brushbar through brushbar
side cover to remove.
PULL
HEPA post-motor filter maintenance
CAUTION:
To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical outlet
before performing maintenance/troubleshooting checks.
IMPORTANT:
The exhaust filter is designed to offer long life with no maintenance. The filter should be
checked periodically and when heavily discoloured it should be replaced. Please do not
wash, scrub or brush the filter as this will damage the delicate filter media.
IMPORTANT:
Unplug and switch off vacuum cleaner before maintenance or troubleshooting checks
