Vax SlimVac VX50, Let'S Get Started

Page: 8 / 13

Taking care of your machine Taking care of your machine
Removing the battery Cleaning the post-motor filter
Cleaning the filter and separator
Emptying the dirt container
Lie the handheld on
its side on a flat stable
surface. Press the
battery release button.
Press the filter cover
release buttons located
on both sides of the filter
cover and pull to remove
the filter from the machine.
Turn the handheld
over and press the dirt
container release button.
Pull the dirt container
forward and up away from
the handheld to remove.
Twist the mesh filter
anti-clockwise to
unlock, lift to remove
from the separator.
Twist the separator
anti-clockwise to
unlock, lift to remove
from the handheld.
Allow 24hrs or until fully
dry before replacing.
Pull to separate the filter from the filter cover/holder.
Tap the filter and filter cover/holder over a bin to
remove any dirt/debris. Wash the filter under running
water if required (40 degrees max).
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
Slide the battery out from
the back of the handheld.
Ensure the battery has been removed and hold the
handheld over a bin, press the dirt release button to
allow dirt/debris to fall out.
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance
or troubleshooting checks.
CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting
checks. For continuous best performance the filter requires cleaning at least every 3 months and should be
replaced every 12 months depending upon use. Do not use your vacuum cleaner without the filters in place.
CAUTION: Always empty the dirt container before cleaning the separator and filter and remove the battery, reach
wand/accessories from the handheld.
WARNING:
Don’t over fill the dirt container to avoid blocking the air flow through the vacuum cleaner. Do not exceed
the MAX line indicated on the dust container.
24hr