Vax SlimVac VX50, Let'S Get Started

Page: 4 / 13

Getting to know your machine Getting started
Assembling your Cordless Slim Vac
Line up the connector on
the reach wand with the
Powered Head. Push the
reach wand down onto
the Powered Head until it
clicks into place.
Push the handheld down
onto the reach wand until
it clicks into place.
The upright slim vacuum
cleaner is not free standing
and in between uses must
always be placed in the wall
bracket or laid flat on the
floor, in a suitable location
so it does not become a trip
hazard or can be stepped on.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Name Cordless Slim Vac
Battery voltage 21.6V
Run time
22 minutes
*
Charge time 5.5 hours
Weight 2 kg
Dust bin capacity 0.4L
Type Lithium-ion rechargeable battery pack
Battery model no. VCBS216V
Voltage
21.6V
Capacity 2Ah / 43.2 wh
Use with Vax model YLS0121A - A260040
Charger ONLY
Technical Specification Battery Specification
Subject to technical change without notice. Turn off brushbar on hardfloors. Images are illustrative only.
Charger model no. YLS0121A - A260040
Input 100-240V ~ 50/60Hz 0.5A Max
Output
26V DC 400mA
Use with Vax Li-ion Battery VCSB216V ONLY
Filter Pack VX50F
Charger Specification
Accessories & Consumables
Before you begin
CAUTION
: Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments
or removing and emptying the dirt container.
IMPORTANT: The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does
overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, remove the battery. Remove
and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for
approximately 1 hour (if you have washed the filter please wait 24 hours for the filter to fully dry before putting back
into the machine).
For best cleaning results, filters require cleaning at least every 3 months and should be replaced every 12 months
depending upon use. If the vacuum cleaner is blocked, remove the battery before removing the blockage.
CAUTION : This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance
always lie flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on.
Brushbar On/Off button
On/Off and charging light
Handheld release button
Reach wand
Power head/accessory
release clip
Powered Head
Brushbar
Battery charger inlet
Filter cover release buttons
Dirt container release
button (hidden)
Battery release
button
Handle
Dirt release button
Dirt container
On/Off trigger
Battery
Continuous power
latch (hidden)