Taking care of your machine
Cleaning the post-motor filter
Cleaning the filter and separator
Press the filter cover
release buttons located
on both sides of the filter
cover and pull to remove
the filter from the machine.
Turn the handheld
over and press the dirt
container release button.
Pull the dirt container
forward and up away from
the handheld to remove.
Twist the mesh filter
anti-clockwise to
unlock, lift to remove
from the separator.
Twist the separator
anti-clockwise to
unlock, lift to remove
from the handheld.
Leave for 24hrs or until
fully dry before replacing.
Pull to separate the filter from the filter cover/holder.
Tap the filter and filter cover/holder over a bin to
remove any dirt/debris. Wash the filter under running
water (40 degrees max).
CAUTION:
Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting
checks. For continuous best performance the filter requires cleaning every 3 months and should be replaced every
12 months depending upon use. Do not use your vacuum cleaner without the filters in place.
CAUTION:
Always empty the dirt container before cleaning the separator and filter and remove the battery,
reach wand/accessories from the handheld.
24hr
