Installing and charging the battery
Slide the battery into
the back of the handheld.
The battery will click
into position when
correctly fitted.
To charge the machine,
detach the reach wand
and lie the handheld on
its side on a flat stable
surface. You can also
charge the machine
whilst attached to the
wall mount. Make sure the
floorhead and wand are
attached together.
Insert the charger lead
into the charger inlet
located on the back of
the handle.
Plug the charger plug into
the mains.
Getting started
NOTE:
The initial charge is 8 hours, charging will be required before first use. The vacuum can be charged with
the handheld either attached to, or detached from, the reach wand. Failure to fully charge the battery before first use
(initial charge 8 hours) may result in poor battery performance.
CAUTION:
The appliance must be disconnected from the mains supply when removing the battery.
CAUTION:
Do not use the vacuum cleaner when the machine is plugged in and charging.
CAUTION:
For best performance the terminals on the battery and vacuum cleaner must be clean and free from
dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner.
The On/Off and charging light will flash red whilst the charger is connected.
Red light – The battery is charging.
Green light – The battery is charged (after 8 hours).
When charging for the first time a full 8 hour charge is required.
