background image

  -

Maintenance 

(Keep  your Vax as good as new)

8

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

Replacing the hard water filter

IMPORTANT:

The condition of the filter affects the performance of your machine. 

Check and change filter (depending on level of use). Do not operate unit without hard water filter in place.

Your machine is fitted with a hard water filter. If you live in an area of hard water the filter will discolour/darken
over time (2). Depending on water hardness and/or frequency of use the filter should be changed every 12
months, or once the filter has completely darkened.

Replacing the washers

IMPORTANT:

Allow the unit to cool down fully before performing maintenance or troubleshooting checks.

Over time, the floor head can become loose. You may need to replace the washers at the end of the body unit
with the replacement washers provided.

Hard water filter in unit.

Hard water filter removed.

New filter.

Old filter-discoloured
and darkened.

Storage

Empty out any remaining water in the tank and clean the external surface with a dry cloth.

All manuals and user guides at all-guides.com

Summary of Contents for S2 Series













Reviews: