9
Vax Careline
0870 606 1248
operation
Align end of hose with projections (A) over slots (B) on
Extra Reach hose. Slide hose into slots and twist hose to
lock it into place. (To detach hose, reverse procedure)
(Fig.4/15).
Attach extension tubes or tools to the other end of hose.
NOTE: Hose must be connected to dirt duct and hose
tube after removing Extra Reach hose for carpet or
floor cleaning.
Attach Extension Tube and Tools
Attach tool or extension tube to the hose.
Attach tool to extension tube by pushing it firmly onto
the tube. Twist extension tube or tool slightly to tighten
or loosen the connection (Fig.4/16).
Select Proper Tool
Combination tool:
use with brush for carved furniture,
table tops, books, lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
Remove brush to clean upholstered furniture, draperies,
mattresses, clothing, and carpeted stairs.
TurboTool:
may be used for upholstered furniture,
draperies, mattresses, clothing, automobile interiors, and
carpeted stairs.
Crevice tool:
may be used in tight spaces, corners and
along edges in such places as dresser drawers,
upholstered furniture, stairs and baseboards.
Extension tubes:
are used to give extra length to your
hose. Use them with any of the above tools.
Floor brush:
(Model: VZL-6016/VZL-6016A/
VZL-6016AA only) use on hard surface floors.
Attach extension tube and tools
Attach tool or extension tube to the hose. Attach tool to
extension tube by pushing it firmly onto the tube. Twist
tube or tool slightly to tighten or loosen the connection.
Combination tool
Slide brush to remove. To replace brushes, align bottom of
brush with grooves on tool. Slide brush into place
(Fig.4/13).
Extra Reach Hose
(Model: VZL-6016 / VZL-6016A only)
The Extra Reach hose provides easier cleaning of stairs
and hard to reach places. Follow the steps below for
attaching and detaching the Extra Reach hose.
Turn cleaner OFF before disconnecting
and connecting hose.
Remove hose end from dirt duct (A). Align end of Extra
Reach hose with projections (B) over slots on dirt duct (C).
Slide hose into slots and twist hose to lock it into place
(Fig.4/14).
Fig.4/14
Fig.4/13
A
C
B
Fig.4/15
Fig.4/16
A
B
