www.vax.co.uk
4
assembly
3. How to assemble
Attach Upper Housing
Remove dirt cup (A) from upper housing (B) by pressing
dirt cup release button (C) and pivoting cup out. Set dirt
cup aside (Fig.3/1).
Using a Phillips screwdriver, remove (3) screws from
cleaner base.
DO NOT DISPOSE OF SCREWS
. Remove
cardboard and discard (Fig.3/2).
Align upper housing over cleaner base and slide down
until upper housing sits securely over base (Fig.3/3).
Using a Phillips screwdriver, fasten (3) screws located at
the bottom of the upper housing (Fig.3/4).
Place bottom of dirt container into cleaner body first.
Pivot container into cleaner body (Fig.3/5).
Press on dirt container release button while firmly
pressing on the container. Release button in order for it
to return to proper position and lock into place. (Fig.3/6).
Attach Hose
Align end of hose with projections (A) over slots on dirt
duct (B). Slide hose into slots and twist hose to lock it
into place (To detach hose, reverse procedure) (Fig.3/7).
Fig.3/1
A
B
c
Fig.3/2
Fig.3/3
Fig.3/4
Fig.3/5
Fig.3/6
