---
R e d l i g h t
= unit on
Bl u e l i g h t
= steam mop ready to use
No light = water heating to max temperature (NOTE: You can still use your steam mop at this time)
If during use the blue light switches off this means the steam mop is heating up to maximum temperature.
The blue light will re-appear when it has heated back up to maximum temperature.
Operation
6
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Steam cleaning hard floors
IMPORTANT:
To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
NOTE:
For 1 x 500ml water tank = 15 minutes steaming
time (approx.). Add detergent if required
NOTE:
When the light is off water is heating to max
temperature.
Plug into mains and turn
on. Press power button in
and the
red
power
indicator light will illuminate.
In under 30 seconds of the
unit being turned on, the
green
steam ready indicator
will illuminate when ready
for use.
To recline the unit place
foot on floor head and tilt
handle backwards.
To steam your floor
WITHOUT detergent,
use the up and down
surface selector to
choose carpet setting
To produce steam
squeeze the trigger in
short bursts. To prevent
overly wetting floors, do
not hold down contiuously.
WARNING:
Never leave the stick steam mop in one spot on any surface for an extended period of time with a damp or
wet pad attached as this may damage the floor surface.
WARNING:
Do not operate/use stick steam mop without water in clean water tank.
1
2
Wood
Carpet
Tile
Vinyl
IMPORTANT:
Please refer to floor manufacturer’s care recommendations before use and test the steam mop on a
discrete area of flooring to begin with.
Move the steam mop
slowly backwards and
forwards across the floor
paying particular attention
to high traffic areas.
Squeeze/release trigger
as required.
S3S-U series UG - 15.08.13_User guide 29/08/2013 10:15 Page 6
