vax.co.uk
11
Steam exhaust vent.
Remove cleaning pad
and inspect unit base for
blockages. If a blockage
can be seen use a small
thin object such as a
paper-clip to try to free
blockage.
Maintenance
(Keep your Vax as good as new)
Clearing blockages
IMPORTANT:
Turn unit off. Allow unit to fully cool down before performing maintenance or troubleshooting
checks.
There is a small opening on the back of the unit at the bottom of the grey trim. This opening is a steam exhaust
vent should the primary path become blocked. If steam starts to escape from this vent you should:
If steam path is still
blocked, remove screw
on floorhead neck.
After floor head is
removed, using a thin
object such as a
paper-clip (in the area
shown), attempt to
remove the blockage.
S3S-U series UG - 15.08.13_User guide 29/08/2013 10:16 Page 11
