Service plan, maintenance
146
Protection of
electronic components
In order to avoid the breakdown of
electronic components within the electrical
system, never disconnect the battery with
the engine running. Never start the engine
while the battery is disconnected (e.g.
when using jump leads).
The battery must be disconnected from the
vehicle before being charged: first
disconnect the negative cable and then the
positive cable. The polarity of the battery,
i.e. the connections for the positive and
negative cables, must not be
interchanged. When reconnecting, first
connect the positive cable and then the
negative cable.
To avoid damaging the vehicle, do not
make any modifications to the electrical
system, e.g. connecting additional
consumers or tampering with electronic
control units (chip tuning).
Disconnecting / connecting the battery
from / to the electrical system
Disconnect the battery from the vehicle
electrical system before charging: First
detach the negative and then the positive
lead. Do not reverse the polarity of the
battery, i.e. do not confuse the terminals
for the positive and negative leads. When
connecting, start with the positive lead and
then connect the negative lead.
Vehicle storage
If your vehicle is to be stored for long
periods without use, we recommend you
consult your Vauxhall Authorised Repairer
for advice.
9
Warning
Electronic ignition systems generate very
high voltages. Do not touch the ignition
system; high voltage can be fatal.
Summary of Contents for MOVANO
