Storage
59
If the backrest is split, unlock the
relevant side, and unlock at both
sides if it is a single unit.
Folding down rear backrests
Remove load compartment cover as
necessary.
Push head restraints down by
pressing the catch.
Guide the seat belts through side
supports to protect them against
damage. When folding the backrests,
pull the seat belts along with them.
Disengage the backrest (single or
split) using the release lever and fold
it down onto the seat cushion.
If the backrest is split, unlock the
relevant side, and unlock at both
sides if it is a single unit.
If the vehicle is to be loaded via a rear
door, take the seat belt out of the seat
backrest guide, roll it up and insert the
latch plate into the side shade
retainer.
Move rear seat backrests upright and
allow locking mechanisms to engage
audibly at both sides. Once the
backrests are locked the red mark
must no longer protrude.
The rear seat backrests can be
locked in two positions.
Do not trap the seat belt when moving
the backrest to the upright position.
Install the load compartment cover.
Ofrecido por www.electromanuales.com
Summary of Contents for Corsa 2010.5
Page 3: ...2 Introduction Introduction Ofrecido por www electromanuales com...
Page 6: ...Introduction 5 Ofrecido por www electromanuales com...
Page 11: ...10 In brief Ofrecido por www electromanuales com...
Page 199: ...198 Technical data Towing hitch installation dimensions Ofrecido por www electromanuales com...