Storage
51
Completely pull out the rear carrier
system until it engages.
Ensure that it is not possible to push
in the rear carrier system without
pulling the release lever again
9
Warning
It is only permissible to fit objects
to the rear carrier system if the
system has been correctly
engaged. If the rear carrier system
will not engage correctly, do not fit
objects to the system and slide the
system back. Seek the assistance
of a workshop.
Install the tail lamps
First remove the rear (1), then the
front (2) tail lamp from the recesses.
Open out the bulb holder on the back
of the tail lamp completely.
Push the clamping lever down and
push the bulb holder into the retainer
until it hits the stop.
Perform this procedure for both tail
lamps.
Ofrecido por www.electromanuales.com
Summary of Contents for Corsa 2010.5
Page 3: ...2 Introduction Introduction Ofrecido por www electromanuales com...
Page 6: ...Introduction 5 Ofrecido por www electromanuales com...
Page 11: ...10 In brief Ofrecido por www electromanuales com...
Page 199: ...198 Technical data Towing hitch installation dimensions Ofrecido por www electromanuales com...