168
Vehicle care
Position the leads so that they cannot
catch on rotating parts in the engine
compartment.
To start the engine:
1. Start the engine of the vehicle
providing the jump.
2. After 5 minutes, start the other
engine. Start attempts should be
made for no longer than 15
seconds at an interval of 1 minute.
3. Allow both engines to idle for
approx. 3 minutes with the leads
connected.
4. Switch on electrical consumers
(e.g. headlights, heated rear
window) of the vehicle receiving
the jump start.
5. Reverse above sequence exactly
when removing leads.
6. Close the cover over the positive
pole.
Towing
Towing the vehicle
Disengage cap at bottom and remove
downwards.
The towing eye is stowed with the
vehicle tools
3
156. The towing eye is
located in a recess.
Ofrecido por www.electromanuales.com
Summary of Contents for Corsa 2010.5
Page 3: ...2 Introduction Introduction Ofrecido por www electromanuales com...
Page 6: ...Introduction 5 Ofrecido por www electromanuales com...
Page 11: ...10 In brief Ofrecido por www electromanuales com...
Page 199: ...198 Technical data Towing hitch installation dimensions Ofrecido por www electromanuales com...