Vauxhall 2013 Adam Owner'S Manual Download Page 30

Page: 30 / 239

Keys, doors and windows

Heated mirrors

Operated by pressing

Heating works with the engine

running and is switched off

automatically after a short time.

Interior mirrors

Manual anti-dazzle

To reduce dazzle, adjust the lever on

the underside of the mirror housing to

the front or rear. Lever in the middle

position is the normal driving position.
Versions with illuminated starlight

panel
When the starlight panel is

illuminated, adjust the lever to the

front. Starlight panel

109.

Automatic anti-dazzle

Dazzle from following vehicles at

night is automatically reduced.

Summary of Contents for 2013 Adam
















































































































































































































































Search results

Summary of Contents for 2013 Adam

Reviews:

Related manuals for 2013 Adam

Brands by name

Popular brands

Vauxhall 2013 Adam, Owner'S Manual

Search results

Summary of Contents for 2013 Adam

Reviews:

Related manuals for 2013 Adam

Brands by name

Popular brands