Vauxhall 2013 Adam Owner'S Manual Download Page 144

Page: 144 / 239

142

Driving and operating

Change speed limit

With speed limiter active, turn thumb

wheel to RES/+ to increase or SET/-

to decrease the desired maximum

speed.

Exceeding the speed limit

When exceeding the limited speed

without driver input, the speed will

flash in the Driver Information Centre

and a chime sounds during this

period.

In the event of an emergency, it is

possible to exceed the speed limit by

depressing the accelerator pedal

firmly nearly to the final point. In this

case no chime appears.
Release the accelerator pedal and

the speed limiter function is

reactivated once a speed lower than

the limit speed is obtained.

Deactivation

Press

: speed limiter is deactivated

and the vehicle can be driven without

speed limit.
The limited speed is stored.
Additionally, a corresponding

message appears on the Uplevel-

Display.

Resume limit speed

Turn thumb wheel to RES/+. The

stored speed limit will be obtained.

Switching off

Press

, the speed limit indication in

the Driver Information Centre

extinguishes. The stored speed is

deleted.

By pressing

to activate cruise

control, speed limiter is also

deactivated and the stored speed is

deleted.
By switching off the ignition, speed

limiter is also deactivated, but the

speed limit will be stored for next

speed limiter activation.

Parking assist

Rear parking assist

Warning

It is the driver who bears full

responsibility for the parking

manoeuvre.
Always check the surrounding

area while reversing and using the

rear parking assist system.

The rear parking assist makes

parking easier by measuring the

distance between the vehicle and

rear obstacles. It informs and warns

the driver by giving acoustic and

visual signals.

Summary of Contents for 2013 Adam
















































































































































































































































Search results

Summary of Contents for 2013 Adam

Reviews:

Related manuals for 2013 Adam

Brands by name

Popular brands

Vauxhall 2013 Adam, Owner'S Manual

Search results

Summary of Contents for 2013 Adam

Reviews:

Related manuals for 2013 Adam

Brands by name

Popular brands