Vauxhall 2013 Adam Owner'S Manual Download Page 48

Page: 48 / 239

Seats, restraints

Suitable are restraint systems that

comply with valid UN ECE

regulations. Check local laws and

regulations for mandatory use of child

restraint systems.
Ensure that the child restraint system

to be installed is compatible with the

vehicle type.
Ensure that the mounting location of

the child restraint system within the

vehicle is correct, see following

tables.
Allow children to enter and exit the

vehicle only on the side facing away

from the traffic.
When the child restraint system is not

in use, secure the seat with a seat belt

or remove it from the vehicle.

Notice

Do not affix anything on the child

restraint systems and do not cover

them with any other materials.
A child restraint system which has

been subjected to stress in an

accident must be replaced.

Summary of Contents for 2013 Adam
















































































































































































































































Search results

Summary of Contents for 2013 Adam

Reviews:

Related manuals for 2013 Adam

Brands by name

Popular brands

Vauxhall 2013 Adam, Owner'S Manual

Search results

Summary of Contents for 2013 Adam

Reviews:

Related manuals for 2013 Adam

Brands by name

Popular brands