EN
the VehiCle battery
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
Caution:
NEVER remove
the transmitter batteries while the
vehicle is powered ON, as loss of
control, property damage or
injury may result.
1
Ensure the ESC is powered OFF.
2
Loosen the hook and loop straps.
3
Install a fully charged battery.
4
Tighten the hook and loop straps.
5
Power ON the transmitter,
then the vehicle.
the transmitter
/ / / / / / / / / / / / / / /
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
inStallinG the tranSMitter BatterieS
1
Push in the battery cover a small
amount to release the retaining tab,
then remove the cover.
2
Install 4 AA batteries, taking care
to align the battery polarity to the
diagram in the transmitter’s
battery case.
3
Carefully reinstall the battery cover
by aligning the tabs with the slots
on the transmitter.
Caution:
If using rechargeable
batteries, charge only rechargeable
batteries. Charging non-rechargeable
batteries may cause the batteries to
burst, resulting in injury to persons
and/or damage to property.
inStallinG the Vehicle Battery
