Vaterra SLICK ROCK, User Manual

Page: 9 / 20

EN
THE VEHICLE BATTERY / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
1 Ensure the ESC is powered OFF.
2 Remove the door from the
battery box.
3
Install the fully charged battery
into the battery box as shown.
4 Connect the battery to the ESC.
5 Reinstall the door on the battery box.
6 Power ON the transmitter,
then the vehicle.
CAUTION: NEVER remove the
transmitter batteries while the vehicle
is powered ON, as loss of control,
property damage or injury may result.
THE TRANSMITTER / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
INSTALLING THE TRANSMITTER BATTERIES
1 Push in the battery cover a small
amount to release the retaining tab,
then remove the cover.
2 Install 4 AA batteries, taking care
to align the battery polarity to the
diagram in the transmitter’s
battery case.
3 Carefully reinstall the battery cover
by aligning the tabs with the slots
on the transmitter.
CAUTION: If using rechargeable
batteries, charge only rechargeable
batteries. Charging non-rechargeable
batteries may cause the batteries to
burst, resulting in injury to persons
and/or damage to property.
INSTALLING THE VEHICLE BATTERY