EN
»
Examine your vehicle on a regular basis.
»
Use a brush to remove dirt and dust.
»
Look for damage to the suspension arms
and other molded parts.
»
Re-glue the tires to the wheels, if necessary.
»
Clean and oil all wheel bearings.
»
Use suitable tools to tighten fasteners.
»
Make sure the camber and steering linkages
are not bent. Replace any bent linkages.
»
Adjust the Toe and Camber settings, if necessary.
»
Remove the shocks and inspect them for
damage. Rebuild the shocks if oil is leaking.
»
Inspect electronics and batteries for exposed wires.
Repair exposed wires with shrink-wrap, or replace the wire.
»
Make sure the ESC and receiver are secure on
the chassis. Replace the double-sided tape,
if necessary.
»
Power ON the transmitter. If the green LED is dim
or off, replace the AA batteries in your transmitter.
»
Check the spur gear and pinion gear for wear.
TUNING, ADJUSTING & MAINTAINING YOUR VEHICLE
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
SERVICE/REPAIR
If any problems other than those
covered in this manual arise, please
call the appropriate electronics
service department. Refer to the
Warranty and Service Information
section for the appropriate depart-
ment to contact.
CLEANING
Performance can be hindered if
dirt gets in any of the moving suspen-
sion parts. Use compressed air, a soft
paintbrush, or a toothbrush to remove
dust or dirt. Avoid using solvents or
chemicals, as they can actually wash
dirt into the bearings or moving parts,
as well as cause damage to the
electronics.
Summary of Contents for SLICK ROCK
Page 1: ...FPO SEE 39971_SLICKROCKCOVER_SPREAD PDF FOR FRONT AND BACK COVERS...
Page 2: ......
Page 3: ...EN...
