Vatech EzRay Chair User Manual Download Page 81

Page: 81 / 86

The documentation, brand name, and logo used in this manual are copyrighted.

No part of this manual may be reproduced, transmitted, or transcribed without the expressed
written permission of the manufacturer.

We reserve the right to make any alterations which may be required due to technical
improvement. For the most current information, contact your VATECH representative.

Manufactured by VATECH Co., Ltd.

Tel: (+82) 1588 9510

Email: [email protected]

Website: www.vatech.co.kr

Head Quarters

Address: 13, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, 18449, Korea

Factory

Address: 13, Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, 18449, Korea

This CE symbol indicates that this product complies with the European

Directive for Medical Devices Directive 93/42 / EEC as amended by the

IIb device by 2007/47 / EC.

Authorized EU Representative:

Vatech Dental Manufacturing Ltd.

Address: Suite 3, Ground Floor, Chancery House, St. Nicholas Way,

Sutton, SM1 1JB UK
Tel: (+44) 0208 652 1900, (+44) 0208 643 7109

Fax: (+44) 0208 652 1909

Summary of Contents for EzRay Chair























































































Search results

Summary of Contents for EzRay Chair

Reviews:

Related manuals for EzRay Chair

Brands by name

Popular brands

Vatech EzRay Chair, User Manual

Search results

Summary of Contents for EzRay Chair

Reviews:

Related manuals for EzRay Chair

Brands by name

Popular brands