Vatech EzRay Chair, User Manual

Page: 45 / 86

5. Troubleshooting
EzRay Chair (VEX-S300C) User Manual 37
EN
G
LISH
5. Troubleshooting
In instances of abnormal operation, alarm/error messages will be displayed on the
Control Panel. If a problem persists, please request assistance from the customer
support information services.
Alarm/Error Messages
A.0X: A problem occurred, and the system performs the
correction automatically. This alarm clears after the correction
is completed.
E.0X: An error occurred. Turn the power off, and then turn it
back on. If the error persists, contact your Service
Representative.
Error Code Check Parameter Description
E.02
X-ray Generator
Error related to X-ray exposure is not
possible to exposure X-ray in the state while
"E.02", "E.03", "E.04", "E.05" where power is
maintained. After X-ray exposure related
error occurs, when the equipment is turned
off and turned on, X-ray exposure is usually
performed.
E.03
E.04
A.06 X-ray Generator
The system needs cooling time due to
continuous operation. (Duty Cycle: 1:60 )
This alarm clears when the system
temperature goes down to normal.
A.07 System
The Remote Exposure Switch has been held
down. Release the switch.
A.08 User
The exposure button has been pressed and
released before the X-ray exposure finished
with the default exposure time. Press and
hold the exposure button for the duration of
the exposure time.