VAT 01 Series Installation, Operating And Maintenance Instructions Download Page 15

 

Installation, Operating, and Maintenance Instructions 

Series 01, DN 16 - 50 (5/8" - 2")

 

 

 

 

VAT Vakuumventile AG, CH-9469 Haag, Switzerland 
Tel +41 81 771 61 61   Fax +41 81 771 48 30   [email protected]   www.vatvalve.com 

271691EB

 

2009-03-09 

15/15 

 

 

Warranty 

 
Each product sold by VAT Vakuumventile AG (VAT) is warranted to be free from the manufacturing defects that adversely 
affect  the  normal  functioning  thereof  during  the  warranty  period  stated  in  VAT's  «Terms  of  Sale»  immediately  following 
delivery  thereof  by  VAT,  provided  that  the  same  is  properly  operated  under  conditions  of  normal  use  and  that  regular, 
periodic  maintenance  and  service  is  performed  or  replacements  made,  in  accordance  with  the  instructions  provided  by 
VAT.  The  foregoing  warranty  shall  not  apply  to  any  product  or  component  that  has  been  repaired  or  altered  by  anyone 
other than an authorized VAT representative or that has been subject to improper installation or abuse, misuse, negligence 
or accident. VAT shall not be liable for any damage, loss, or expense, whether consequential, special, incidental, direct or 
otherwise, caused by, arising out of or connected with the manufacture, delivery (including any delay in or failure to deliver), 
packaging, storage or use of any product sold or delivered by VAT shall fail to conform to the foregoing warranty or to the 
description  thereof  contained  herein,  the  purchaser  thereof,  as  its  exclusive  remedy,  shall  upon  prompt  notice  to  VAT  of 
any  such  defect  or  failure  and  upon  the  return  of  the  product,  part  or  component  in  question  to  VAT  at  its  factory,  with 
transportation  charges  prepaid,  and  upon  VAT's  inspection  confirming  the  existence  of  any  defect  inconsistent  with  said 
warranty or any such failure, be entitled to have such defect or failure cured at VAT's factory and at no charge therefor, by 
replacement or repair of said product, as VAT may elect. VAT MAKES NO WARRANTY OR REPRESENTATION OF ANY 
KIND,  EXPRESS  OR  IMPLIED,  (INCLUDING  NO  WARRANTY  OR  MERCHANTABILITY),  EXCEPT  FOR  THE  FORE-
GOING  WARRANTY  AND  THE  WARRANTY  THAT  EACH  PRODUCT  SHALL  CONFORM  TO  THE  DESCRIPTION 
THEREOF CONTAINED HEREIN, and no warranty shall be implied by law. 
 
Furthermore, the «Terms of sale» at the back of the price list are applicable. 
 
 

Summary of Contents for 01 Series
















Reviews: