Installation, Operating, and Maintenance Instructions
Series 01, DN 16 - 50 (5/8" - 2")
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected] www.vatvalve.com
271691EB
2009-03-09
1/15
Mini UHV gate valve
with manual actuator
with pneumatic actuator
This manual is valid for the valve ordering numbers:
01024/28/32/34-
.
E01/08
01024/28/32/34-
.
E11/21/31/41
01024/28/32/34-
.
E12/22/32/42
01024/28/32/34-
.
E14/24/34/44
The fabrication number is indicated on each product as per the label
below (or similar):
made in Switzerland
Fabrication No.:
patented
. .
010
. .
– . . . . – . . . . / . . . .
A
– . . . . . .
Fabrication number
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Attention!
Hot surfaces; do not touch!
Product is in conformity with EC guidelines,
if applicable!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air lines.
Do not touch parts under voltage!
Wear gloves!
Read these
«Installation, Operating & Maintenance Instructions»
and the enclosed
«General
Safety Instructions»
carefully before you start any other action!
