OPERATION AND MAINTENANCE MANUAL
ID MOTORS
PAGE: 40
CODE: CTT52 EDITION: 03 RELEASE: APRIL 2019
Subject to technical changes without prior notice
Figure 8:
Fitting the coupling
PRECAUTION
Damages to the motor bearings
If the motor shaft is knocked, the bearings may be damaged.
If belts are used for the transmission of the torque or a gear with radial load, make sure that the admissible radial load is not
exceeded on the motor shaft. The specific data for the admissible radial loads for each size of motor can be found in the Table
PRECAUTION
Damages to the motor bearings
If the maximum value of the admissible radial load is exceeded, the shaft may break and the bearings may seize up due to
fatigue. The customer is responsible for making sure that the tension of the transmission belts does not exceed the established
limits.
