OPERATION AND MAINTENANCE MANUAL
ID MOTORS
PAGE: 42
CODE: CTT52 EDITION: 03 RELEASE: APRIL 2019
Subject to technical changes without prior notice
5.2.1
Terminal boxes and connector strips
The motor has a terminal box with the corresponding electrical connection strip and connection bolts for the current of each
motor.
The table below summarises the different types of terminal boxes, strips and terminals that correspond to the standard execution
of each shaft height of the ID motors.
MOTOR
TERMINAL STRIP
TIGHTENING
TORQUE
TERMINAL
BOX
ID 100
M6
4Nm
135x105x76
ID 112
M6
4Nm
135x105x76
ID/IDX 132
M8
8Nm
185x185x91
ID/IDX 160
M8
8Nm
185x185x91
ID/IDX 180
M12
20Nm
300x300x120
ID/IDX 200
M12
20Nm
300x300x120
Table 22:
Standard terminals and boxes on ID motors
By request, modifications can be made to the values specified in the table.
The motor power connections must be made with a cable section that corresponds to the rated current of the motor and in
accordance with the schematic provided on the interior of the terminal box cover of each motor.
