Model #: XL-1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 5
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go
back and fully tighten all bolts, this will make it easier during assembly of unit
.
1. Unpack the unit and confirm that you have all the hardware and required parts listed.
Note: Please decide which configuration you would like to use before starting to assemble
the unit. Once you decide you can continue with steps #2 through #7, or skip any of the
steps you don’t need, according to your option.
Option #1
Short Spine (Steps #8 to 10)
Console Only
Option #2a
Long Spine (Steps #11 & 12)
Swinging Mount:
DLX Bracket w/Mounting Plate
Option #2b
Long Spine (Steps #13 to 23) Swinging Mount: XYZ Mounting Frame
Option #3
Short Spine (Steps #24 to 35) Wall Mount
2. Locate the Spine (D) or Short Spine (D1) and set back face down on a scratch free
surface, then place the Shelf Frames (A, B & C) on it, make sure the holes of the bracket
aligned with the threaded inserts of the Spine and the top surface of Frames are flush
with the grooves of Spine. Then assemble the Shelf Frames to Spine with the 5/8
” Bolts
(2). See detail #1.
Parts Required
Qty Tools Required
A - Top Frame
(1)
Allen Wrench
B - Shelf Frame
(1)
C - Bottom Frame
(1)
D - Long Spine or D1 - Short Spine
(1)
(2) - 5/8” Bolt
(12)
