Model #: XL-1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 17
Option #3:
WALL MOUNT w/XYZ MOUNTING FRAME
24. In case you want to hang your Plasma TV on the wall, you can follow these steps.
25. The XYZ Mounting Frame (J)
must be mounted to two Wood Studs at least 12” apart,
using a high quality stud sensor locate two adjacent studs, verify with a nail if correct.
26. Pre-
drill a 2 1/2" deep hole at the desired height in each stud using a 3/16” drill bit, make
sure that the holes are center area of the studs and level with each other. Use the XYZ
Mounting Frame (J) as a template to mark the location of the second hole in each stud
and drill another set of holes 2 1/2" deep with the 3/16” drill bit in the marked location.
27. Now attach the XYZ Mounting Frame to the Wall using four Lag Bolts (10) through the
Lag Bolt Washer (11) through the XYZ Mounting Frame into the holes in the wall. Make
sure the Bracket is oriented so the flat surface of the
“U” plate is against the wall and
that a set of Lag Bolts is on each side of the center rail as shown in detail #13.
Parts Required
Qty
J – XYZ Mounting Frame
(1)
(10) – Lag Bolt
(4)
(11) – Lag Bolt Washer
(4)
Tools Required
Stud Sensor, Mallet, Power Drill, 3/16” Drill Bit and Socket Wrench
Adapter with Socket Set
Maximum weight 165 lbs.
