Model #: XL-1
Please call for replacement parts or assistance:
1-866-942-5362
VAS Furniture Mfg. Inc.
Factory No. 55-12029
Page 18
XYZ MOUNTING FRAME on BRICK, SOLID CONCRETE OR BLOCK
28.
Use the XYZ Mounting Frame (J) as a template to mark six holes location in the
wall, three in the top row and three in the bottom row of slots.
29.
Make sure that the holes are level and there is at l
east 6” between any two holes,
pre-
drill these holes with a 1/2” masonry bit to at least 2 1/2” in depth.
30.
Now insert a Concrete Anchor (9) into each of these holes; make sure the anchor
is seated completely flush with the concrete surface even if there is a layer of
drywall of other material in front.
31.
Now attach the XYZ Mounting Frame (J) to the Wall using six Lag Bolts (10)
through the Lag Bolt Washer (11) through the slot of
“U” Plate on XYZ Mounting
Frame into the holes in the wall. Make sure the Bracket is oriented so the flat
surface in the center of the plate is against the wall and that a set of Lag Bolts is
on each side of the center rail as shown in detail #14, only in this case will have
three Bolts per side.
Parts Required
Qty Parts Required
Qty
J – XYZ Mounting Frame
(1)
(9) –Concrete Anchor (6)
(10) – Lag Bolt
(6)
(11) – Lag Bolt Washer (6)
Tools Required
Mallet, Power Drill, 1/2” Masonry Bit and Socket Wrench Adapter with
Socket Set
Maximum weight 165 lbs.
