4 / 7
2. Brief Introduction
LED Light Source: 208 PCS super brightness
¢
5 LED,4 colors:Red,Green,Blue,White.
Digital Display
Master Slave Mode
Auto Mode
Sound control mode( Sensitivity adjustable)
Standard DMX512 control signal 4 or 7 DMX channels.
Splendid effect with running and chasing.
Voltage:
□
AC100V~120 / 60Hz
□
220V ~240V / 50Hz
Power Consumption 20W
Work Environment:Indoor 20
0
C-40
0
C
Net weight:5 KG Gromss weight:6.5KG
Dimension: 490L×330W×185H mm
Application: Main apply in entertainment places,such as dance hall,night club,stage,stadium,bar and
KTV.
Character:This product use super brightness LED as light source,colourful,unti-shake,long working
life.(100,000 hours),low heating,less power consumption,,high security,can working 24 hours without
stop.
3. Installation
1
、
The light can be fixed in any place,but the light must keep a distance between person or objects at
1m minimum. And please make sure the light is fixed well, the light should be earthed.
2 Please make sure the rated voltage and frequency should suit to your local voltage.
3 You can turn on the light after connected,and the light will reset,the lamp will off automatically when
resetting,all these will push the motor to be a limited point.All the microprocessor control systems
can record the position of all the motors.
4 Connection of the DMX512
The DMX512 signal of the controller is serial connected through the Input and Output 3pins XLR
socket of the light.
(1 Earth 2 Negative 3 Positive
Note Please exchange to solder the pin2 and pin3 if it’s
uncontrolled, it’s unnecessary to change normally. The length of the signal cable should keep
within 100 meters in order to avoid the interference.The light will work according to the IP Code
which you selected when you are using the DMX512 controller control LCC004 4-Head LED Effect
Light.Setting of IP Code,first light show IP is A001,the second light is 1+4=5 IP Code is A005 the
third light is 1+4+4=11,IP Code is A011,(analogy accordingly,the setting method should according
to the controller