Varytec Hell Ball I, User Manual

Page: 6 / 8

6 / 8
Manual Switcher Control List
Bit No 1 2 3 4 5 6 7 8 9 10
Controller Mode
○ ○ ○ ○ ○ ○ ○ ○ ○ ×
Slave Mode
× × × × × × × × √ √
Auto Mode
○ ○ ○ ○ ○ ○ ○ √ × √
Sound Mode
○ ○ ○ ○ ○ ○ √ × × √
Led Speed 1
○ ○ √ √ ○ ○ ○ ○ × √
Led Speed 2
○ ○ × √ ○ ○ ○ ○ × √
Led Speed 3
○ ○ √ × ○ ○ ○ ○ × √
Led Speed 4
○ ○ × × ○ ○ ○ ○ × √
Motor speed 1
√ √ ○ ○ ○ ○ ○ ○ × √
Motor speed 2
× √ ○ ○ ○ ○ ○ ○ × √
Motor speed 3
√ × ○ ○ ○ ○ ○ ○ × √
Mast
Mode
Motor speed 4
× × ○ ○ ○ ○ ○ ○ × √
Remark:
①“√”
means turn on,
“×”
means turn off,
“○”
means turn on or off.
②
With DMX mode,the IP code be setted by manual switcher.IP
code range is 1 to 511.
4. Maintenance
Please make sure it’s power off before you open or maintain the light,it’s very important to keep
clear cleaning the light usually will not only keep it with maximum brightness output,but also prolong
its work life. The professional glass detergent for cleaning is suggested,alcohol and any chemical
detergent is not allowed. The internal of the light must be cleaned by the vacuum cleaner
once each year.
4.1. Warning
Please don’t dismantle or remodel the light.
Please keep the light away from water or any of the liquid and metals.
Please don’t install the light in high temperature environment.
Please don’t irradiate on the flammable objects, it must keep a distance at 5m minimum between light
and flammable objects.the light must keep a distance with the near objects at 1m minimum.
Please don’t look at the light directly, or it will hurt your eyes.
Please make sure it’s power off before open or repair the light.