4 / 8
2. Brief Description
LED Light Source: 1PCS 10W RGB LED.
Auto Mode
Sound Mode
Master Slave Mode
Standard DMX512 control signal,6 DMX channels.
Voltage:
AC220V 60Hz
Power Consumption 25W
Work Environment:Indoor 20
0
C-40
0
C
Net weight:3KG Gross weight:3.7KG
Dimension: 250L×250W×245H mm
Package : L 310
×W 310×H295mm
Application:Main apply in entertainment places,such as dance hall,night club,stage,stadium,bar and
KTV.
Character:This product use super brightness LED as light source,colourful,shakeproof,long working
life.(100,000 hours),low heating,less power consumption,high security,can working 24 hours without
stop.
3. Installation
1
、
The light can be fixed in any place,but the light must keep a distance between person or objects at
1m minimum. And please make sure the light is fixed well, the light should be earthed.
2 Please make sure the rated voltage and frequency should suit to your local voltage.
3 You can turn on the light after connected.
4 Connection of the DMX512
The DMX512 signal of the controller is serial connected through the Input and Output 3pins XLR
socket of the light.(1 Earth 2 Negative 3 Positive
Note:Please exchange to solder the pin2 and
pin3 if it’s uncontrolled, it’s unnecessary to change normally. The length of the signal cable should
keep within 100 meters in order to avoid the interference.The light will work according to the IP Code
which you selected when you are using the DMX512 controller control HellballRGB LED Light.Setting
Summary of Contents for Hell Ball I
Page 1: ...User s manual Hell Ball I...
