Varytec Giga Bar Pix 8 RGB, User Manual

Page: 38 / 64

A sound controlled automatic show can only be activated when the unit is operating in stand
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[MODE] until the display shows ‘SUxx’ . This activates a sound controlled automatic show.
Now you can adjust the sensitivity of the built-in microphone for sound control. Use [UP] and
[DOWN] to select a value between 0 (low sensitivity) and 31 (high sensitivity), display shows
‘SU00’ ‘SU31’ .
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Sound control and microphone
sensitivity
Operating
38
Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB
LED bar