Varytec Giga Bar Pix 8 RGB, User Manual

Page: 35 / 64

Automatic operation can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press
[MODE] repeatedly until the display shows ‘Auto’ .
To adjust the speed of the automatic mode, press [SETUP] repeatedly until the display shows
‘SPxx’ . Now use [UP] and [DOWN] to select a value between ‘SP01’ (slow) and ‘SP99’ (fast) or
‘SPFL’ (flash effect).
To adjust the flash frequency of the automatic mode, press [SETUP] repeatedly until the display
shows ‘FSxx’ . Now use [UP] and [DOWN] to select a value between ‘FS00’ (slow) and ‘FS99’
(fast).
To adjust the fade speed of the automatic mode, press
[SETUP] repeatedly until the display
shows ‘Fdxx’ . Now use [UP] and [DOWN] to select a value between ‘Fd00’ (slow) and ‘Fd99’
(fast).
Wait about 30 seconds until the display turns dark. Then the settings have been applied. To
return to the parent menu without making changes, press [MODE] .
Operating mode ‘Automatic’
Operating
Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB
35
LED bar