Varytec BAT.PARset 4 RGBW User Manual Download Page 57

Page: 57 / 64

Symptom

Remedy

The unit does not work, no light

Check the mains connection and the fuse.

No response to the DMX con-

troller

1. If the dot behind the first character of the display is

flashing in the DMX mode, no DMX signal is received.

Make sure that the DMX controller is turned on. Check

the DMX ports and cables for proper connection.

2. If the display does not flash and still no response,

check the address settings and the DMX polarity.

3. Try using another DMX controller.

4. Check to see if the DMX cables run near or alongside

to high voltage cables that may cause damage or inter-

ference to DMX interface circuits.

If the procedures recommended above do not succeed, please contact our Service Center. You

can find the contact information at

www.thomann.de

Troubleshooting

BAT.PARset 4 RGBW

LED lighting set

Summary of Contents for BAT.PARset 4 RGBW

































































Search results

Summary of Contents for BAT.PARset 4 RGBW

Reviews:

Related manuals for BAT.PARset 4 RGBW

Brands by name

Popular brands

Varytec BAT.PARset 4 RGBW, User Manual

Search results

Summary of Contents for BAT.PARset 4 RGBW

Reviews:

Related manuals for BAT.PARset 4 RGBW

Brands by name

Popular brands